Size Guide - Soft Serve Machines

Size Guide - Soft Serve Machines

Size Guide :: Soft Serve Machines
Choosing the right size
Spaceman has tested all of our equipment with various size servings to meet the needs of all of our customers.  Below is a chart that shows what each Soft Serve Model is capable of serving, per minute, per barrel / freezing cylinder.  

Correctly sizing the machine is important to ensure smooth operation.  Dispensing more product than the machine is designed for will cause problems like freeze ups and could cause damage to the machine not covered under warranty.
Special Note:  Ambient temperature, machine clearance and product ingredients may increase or decrease output.  Please see the Soft Serve Brix article for more information regarding correct product sugar content.

Servings per minute per barrel / freezing cylinder
Model
(all configurations)
4oz Servings
6oz Servings
8oz Servings
12oz Servings
SM-6210
2
1.5
1
not recommended
SM-6236
6
4
3
2
SM-6235
3
2
1
not recommended
SM-6250
3
2
1
not recommended
SM-6378
6
4
3
2

Note:  All serving sizes are referenced in fluid ounces (volume), not by weight

    • Related Articles

    • Soft Serve Product Mix Guide

      Standard Operations Guide :: Soft Serve Product Mix Guide Introduction Spaceman Soft Serve machines are designed to operate with a wide variety of products including dairy, non-dairy, high and low fat, and other various types of soft serve products. ...
    • Size Guide - Frozen Beverage Machines

      Size Guide :: Frozen Beverage Machines Choosing the right size Spaceman has tested all of our equipment with various size servings to meet the needs of all of our customers.  Below is a chart that shows what each Frozen Beverage Model is capable of ...
    • Choosing the Right Soft Serve Machine

      Documentation :: Choosing the Right Soft Serve Machine Introduction Selecting the right soft serve machine is important to your success. By the end of this article you should have a good understanding of the basics of soft serve machines and how to ...
    • Soft Serve – Common Errors

      Training :: Soft Serve :: Common Errors and How to Avoid Freeze Ups Freeze ups lead to issues which prevent you from serving product.  In severe cases, expensive components can be broken or damaged and cause extensive down-time. Freeze ups are caused ...
    • Soft Serve Best Practices

      Standard Operation Guide :: Soft Serve :: Best Practices For most operators, a Soft Serve machine may seem like an overwhelming and daunting piece of equipment.  The reality, however, is that with a few good habits and implementing proper processes, ...