Machine Installation Clearance

Machine Installation :: Clearance

Introduction

During installation and operation of your Spaceman USA machine, your machine is required to have a minimum of 6" (150mm) of clearance on all sides of the machine (including the rear of the machine) in order to function correctly. Clearance means that there should be no wall, cups, product, etc. that would obstruct the flow of air in and around the machine.

Important: If exhaust has insufficient clearance, this may cause premature failure of expensive refrigeration components that would not be covered under warranty.

If your machine is equipped with an air-chute, the sides of the machine without an air-chute must still have the required clearance of 6" in order to function correctly.

Spaceman USA may require that you send pictures of your equipment installed in your location showing this required clearance in order to perform any troubleshooting or warranty service.